Cationoic Polyacrylamide CAS NO. 9003-05-8

Payment Type: L/C,T/T,D/P
Incoterm: FOB,CFR,CIF

Basic Info

Model No.: CAS NO. 9003-05-8

Additional Info

Transportation: Ocean,Land,Air

Place of Origin: China

Port: Shanghai,Tianjin,Qingdao

Product Description

1. CAS NO. 9003-05-8
Technical Standard:The national GB/T17514-2017
Molecular Formula:(C3H5NO)n
Relative Molecular Weight: 71.07     
2. [Specification]

Appearance White granules or powders White granules White granules
Molecular Weight (Ten thousand) 1200-1800 1000-1200 800-1200
Solid Content 90%MIN 90%MIN 90%MIN
Degree of ion  / hydrolysis degree of hydrolysis        10%-35% degree of Ionic          10%-60% degree of hydrolysis          5%-20%
Residual Monome 0.2%MAX 0.2%MAX 0.2%MAX
Range of Application Water has a neutral or alkaline PH Belt type centrifugal press filter press Water has a neutral or alkaline PH

3.Product use:                                                                                      
Used for domestic sewage, purification of industrial water, industrial waste water, backwater injection in mines and oilfields, purification of papermaking, metallurgy, coal washing, leather and various chemical waste water treatment.

4.Method of use: 
1. Before use, PAM should prepare 0.1%-0.5% concentration of water solution, which is suitable for using neutral water without salt.
2. Due to the wide range of water PH values applicable to this product, the general dosage is 0.1-10ppm (0.1-10mg/L).
3. Sufficient dissolution.This product should be paid attention to when dissolving, especially the automatic dosing device should not flow too fast to prevent PAM agglomeration, fish-eye phenomenon and unnecessary troubles caused by pipe clogging.
4, the mixing speed is 200 RPM commonly advisable, time not less than one hour, raise the temperature of 20-30 ℃, can accelerate the dissolve.The highest temperature liquid should be less than 60 ℃."

5.Packing and storage:                                                                          

Every 25Kg of solid products should be put in one bag with inner plastic film and outer plastic woven bag.

Products should be stored in the dry, ventilated and cool place inside the door for fear of damp. Don't store them together with inflammable, corrosive and toxic goods.

Polyacrylamide white powderCationic Polyacrylamide FlocculanPolyacrylamide in water treatmentPolyacrylamide in water treatmentCationic Polyacrylamide Flocculan

Contact Info


Shaanxi United Xingchuang International Co., Ltd.

Address: Fengdong New City of XiXian New Area, Shaanxi.,Xian,Shaanxi

Contact Person: Sally Sun



Full name Contact Phone Content